, Before we move on, there are a number of quirks indicate about macppp. If the loading folder is not in the root catalog of the start of the start (i.E. Is located in/machdd/documbities/system foper/vomus/machdd/system, classically), then it will either not work correctly (system 7) or give up the error by saying, saying, saying that he cannot find the preferences file (system 6): he does not like loading folders, which are not called the "system folder". In scheme 7, he owns a terrible mistake regarding memory, throwing a mistake, saying that she does not have enough memory to start. A way to get around is a reboot with the preference of mactcp, installed on a significant choice, except ppp, then turn on the ppp after rebooting so that it has no chance of complaining. On the network, 7 macppps, it seems, does not redraw the area of the active connection of the window, so the room in front of it is another window, and then take the macppp window back to the front line to make it redraw it. At the stage of establishing the connection, the connection cannot take more time than a second or two - if it is about you, there is a navigable nuisance. Try to use "soft closure" to replenish the connection.
Client computer (classic mac) now has the right to access local ftp servers, remote www servers, etc. It was on a home modem connection or (slower) ethernet interface. (The previous image shows a complete online connection that has become possible without a keyboard on a client computer, what is possible, but mac are usually helpless without cursor control.)
The sequential line of the network protocol
Slip was a predecessor who was supposed to be a point protocol (ppp), and it is very simplified, suitable for use on microcontrollers today, but was not unusual in the early 1990s, which could be found on personal equipment (even plip was possible). Since this protocol will be used specifically, only to 512k and 512ke, it will be somewhat shorter than several other sections. Mac plus should use ppp. Instead of this.
Macslip, which was not happening by commercial software by means of some thorough dredging work through the world wide web. If, however, this software is available, do not hesitate to launch the generator, since it was sufficiently widespread on sliding dates. It will be concentrated here on ncsa telnet 2.5, which has an option for connecting for slip and interslip. Mactcp is necessary for all cases here: macppp or other ppp software must be removed first because they will conflict among themselves.
Interslip is really very easy to use. The installer comes with some reference documentation, which in clear terms explains how to start it and go out the door. It will require an element of the sliding server: in general, expressing, this means that the new computer will fill this role. Since all this requires mactcp, he has good chances not to work well with 512k, there is definitely no work on 512k, but it is most reasonable to leave for the highest systems. Meanwhile, there is a publication on the old usenet, which certifies that the hsk hardware does not work with interslip. All this, that is, will not be valid for 512ke, because the hardware hsk has not remained so long as long as the mac plus.
The only other software that will be mentioned here is ncsa telnet 2.5. It has a built -in sliding mode, which was quickly removed at 2.6 and 2.7. This mode, as soon as all the configured and all detailed details have worked, allows you to install a ftp server. Since this requests familiarization with the *nix system, for the average layman is not recommended to be used. Film files can be freely found on the ftp archives ncsa website. Port most linux cars, if they use grand unified bootloader), may include the ability to immediately provide a hint of the shell impregnated over the sequential port. Mac os x, among other things, is able to do this, although this procedure usually has to lean strongly to new users. Some variants of the server windows are able to perform a similar operation from the module of emergency care services. Otherwise, third -party programs should fill in void because windows does not have a command line bacand, really do this *nix. So, this section will be by default in os x and linux; and the customer is possible almost anything, which supports vt100, so, as old poppies are methods of increasing bitrate and turning on the hardware warehouse. For the mac that will use this interface, especially for the set tasks of file transfer tasks, this is a good thought. In another situation, 19200bps is in order for any occasion.
Some of the methods of switching the unused linux box to overdrive is to obtain access to two sequential ports on the same machine. Make one sequential port dedicated to the consistent console, and the second, as the port of the pseudo-ppp.S help, the usual access to the network is possible through fetch, irc or web browser, but in general the call of the terminal program also allows you to call the server. Of course, you can just start the telnet server and need only in one port ...
Linux
We start with debian distro, in a similar situation, ubuntu will assume. Assuming the karmic coal (9. Written or higher, open the terminal program and drive the following:
If the usb adapter to rs232 or keyspan rs422 is used, just change ttys0 to ttyusb0 rs422. Therefore, the name of the file is ttyusb0. Conf. In an open text document, enter the following text (change it to ttyusb0, if we are talking about):
Another method is there to just modify it so that the usb adapter is connected, getty will launch service. You need to contact a related howto if the visitor has an older version of ubuntu or for instructions about the rules on how to prepare for a sequential port, which usually presents the usual selection screen of grub os for a sequential terminal. People who can do this will want to do this to have a live compact -disposal or linux loading panel that can restore grub if an error is made: also save the grub repair instructions nearby. It is not fundamentally for yours demonstrated here. Change the bitrate since 19200 to the desired: the 128k and 512k series should probably use 9600bps. Turn off the appletalk for the best performance at 512k and up, if the move is not worth it: the bitrate can be pushed slightly higher, but after 38400 bits / s, since everything is based on the text that does not take much time to send through the wires. Finally, to activate the service, run the following:
Or if you used the usb adapter, use the sudo start ttyusb0. Replace the beginning with a stop to put out the operation. We hope that the lrzsz package will be mounted: file transfer can be made using this interface. If a hardware order is required, then change the last line of the configuration file in order to look like this, do not be afraid to change the bitrate to other speed):
Mac os x
According to a certain the author, the operation increased in the problems with os x 10.6, in this regard, there is more work regarding this ringtone at the end.
A good primary source for such a section is this useful page. It is worth saying that the approved nerd method is to use vi or emacs to edit text files, but pico less scares customers who do not often go to the command line. Use this time as sudo pico /and so on. D. /Ttys; due to the tiny window size, he is able to feel cramped. Use either a mouse to choose a text or use control shift ^ in order to include and exit from the “text selection mode” using the “copy” function keys from the arrow in general. Subsequently, we pay attention to the changes with the following:
The absence of more information regarding this option, the matter of any attempts by the author of 10.2, 10.3-and 10.4 were failures. Even this link, which is similar to the “phase 1 testing”, to see, it will work at all, failed. The rs232 adapter was the same that was used earlier, and the text could be sent through the sequential port on the screen of the terminal of another computer, but you must agree more, nothing was possible. Contact the neighboring image for some tips regarding this function. Use here. It is assumed that the path of the sequential port is already known, discovered through ls /dev/tty.*. Open the terminal and enter the following; if you are planting another bitrate, change 19200 and std.19200 to something similar (and of course, a change in the name of the sequential port for any case):
Click enter, then control a which is the sequence of shooting . The hint will appear in the left corner of the terminal window. Click shift; (the colon :), which raises the command line. Enter the following line b (also, change for conformity):
, Take into account that the user’s password is transferred immediately to the hostel (because the screen window is mirror) and works on the review , then have the above - in view. Std.19200 corresponds to any of the “fixed speed recordings” in the configuration file /etc /gettytab, there is nothing simpler of the next of preliminary defined profiles.The terminal window will show everything, the education that includes the client, not counting the bonus function: doubling the character, which means that if the client is part of ls -al more than the host -terminal window will look like llss -aall mmoorree. Just minimize the window to keep it away, although the closure is either not to be preferable, because the screen and login are still active. If the account is incorrect, then getty should be launched again. Use control a, then shift / (a? Symbol), in order to see a list of commands, and control a, then control \ to beoft ecrem, a well -known problem that the linux technique used does not work, just raise the command the line is still. But instead of starting getty, instead use such a line:
It would be desirable, so that the line that this team is introduced is not able to exceed 80 characters (window width), further symbols have passed the column 80 ignored. Gratitude goes to mcdermd for this method with a screen for a consistent console.
24 -hour free access to the customer
After installing the "server" and can all have falsified to the activities with the help of wires, configure the terminal program, as described earlier. There is no support for xon/xoff, and hardware control is not used, if the offer was not turned on: leave it according to the client when it is not on the server. Since the server was primarily configured, it is likely that the program of client terminals was supposed to be configured with the appropiat bitrate settings and the sequential port after the host system has already sent a hint to open the system. Just press the return a couple of times to get a new hint for access. After entering the pipeline, the shell closed is produced. On it you can use the usual command lines of the terminal, etc. One of which includes 128k, which have no keyboard keyboards with arrows, they will probably benefit from the user map of the keys in lynx: you should also print a list of those keyboards, because by default, he uses the entire keyboard (click “k”, and find an assortment of all absolutely ties with keys).
It is possible to send videos through the lines through xmodem, ymodem (don’t worry) or zmodem. Expert visitors can try to use a cat for a pipe for the terminal, but we will consider this, now. It is possible that it is better to wrap the binhex file in the macbinary encoding (or packit for the earliest 128/512k series), and not flirt with ascii loading. At the moment, here are a few examples of sending films through this method through xmodem:
This is how the syntax works: rz activates the rz program (get zmodem), -x puts places in the xmodem mode and and name file (for example, terminal.Image.Bin for here) an incoming file. Xmodem does not send the file name using datastream as zmodem, so the recipient must name the file. By default, the choice, where the incoming data is reset (or where it is looking for a file for sending), the same as the work folder, therefore, if the current catalog (use pwd to demonstrate it). , Then he will be stored there. Change rz to sz and provide the file name for download, for example, in which cases it is used here, ssw201nad.Image.Bin is loaded, and the recipient is obliged to provide a name for it (first enter the command, and then place the terminal program (zermer, macmerminal ,. ..) In the xmodem reception). If you use zmodem, then it is important to place the formation on the reception signal - there is nothing easier to introduce rz: for downloading, something like szw201nad.Image.Bin does a trick. To get help in the programs, enter sz -help for the sz and rz -help program for the rz program. There are no examples of free examples in the conclusions of assistance, so some examples are given here. Os x does not have an installed lrzzz package, so this option of cooperation will not work. Install macports, then install the portable version of lrzzz.
Localtalk networks
The simplest internet for the interaction of classic mac - localtalk, although there is a little too little industry, most often the nuance that the player is "elderly", and also (as in the previous section), are slow. Whereas he really perfectly coped in the last century, the reality is such that ethernet is significantly more useful.
Localtalk networks very spartan. They have a composition from interface devices, including computers, printers, etc.; Then there is localtalk hubs, routers, cables, etc. .. The simplest localtalk network can be easier than a consistent cable of mini-din-eight percent of the port of a printer of one mac to the port of the other. Additionally - a local branching is required, which allows you to photograph the devices together. Localtalk splatters perform on their own.The main usual localtalk configuration (not phonenet) is the fact that external watches can be used to launch a bitrate. T we easily use the standard (in the usa) rj-11 phone? Localtalk is a wide sequential protocol that is no different from many other network protocols. The man called reese jones, and the risk was formed by pharallon to develop his concept. The product remained successful, and there was also a good handful of clones in that place, plus an amateur turn or two on the concept. Occasionally, even apple thought it was a pretty good solution, since it was believed that localtalk mini-din-8 cables, with that, with that it was successful, they were stupid and expensive enough, they could not launch the cables as much as phonenet could, and phonenet could integrate the wiring in the building integrated into the existing google display ads phone. Usually, at what point humanity speak of the collection of a private network grid, they usually mean a phoneenet network. The process did not help that the localtalk adapters were approximately twice the price of phoneenet adapters, and then the question arose about partnerships with cables, they were not cheap initially. (According to secrets mac, the second edition, apple used phonenet in internal networks.)
Fonenet itself simply converts the full duplex of the rs422 into rs485 half -duplex. Internally yellow and black wires, which suggest a standard color arrangement, are simply differential pairs and interchangeable with each other: this means this is not like a cross location. This should be done due to the fact that rxd and rxd-are connected together in one pair, and txd and txd are connected together in the other. It is fundamentally reversible, and it was easier to cross the wires, as in yellow> black and black> yellow, and will work at this time. Idiotic proof, if there was an example of this. There are adapters and splitters rj11 mini-din-8 up to 4 bonds and de-9-rj-11 splatters used for the macintosh 128k for 512k, which used the de-9 ports for printer connection and modem, although 128k they are not able to use appletalk networks. Some corporate networks, one of which include the melbourne university, worked in asynchronous networks with registration of the rs232 type, and this required special software to solve appletalk through a translator. One of them, candidates who were impossible were tried, is called atalk 1.0. A copy can be found in mac gui. In addition, the usual de9 interface, used on a huge amount of pc, is technically capable of using localtalk traffic, but without any nucleus modules or appropriate drivers it will practically not work with localtalk. Instead, use the afp bridge.
As for unloading, the maximum usual “quick sequential port” can be reduced into force 921600bps, and the geoport now appears at 2 mbps. While the acceleration of machines for localtalk is sometimes stretched on a variety of forums or e -mail groups, the reality is almost that none of these units have. In the three -year participation of the author there is a hobby, not a single unit, in addition to the adapter farallon etherwave mac/pb, appeared in all the city with acceleration capabilities. Partially, the reason is that most places used phonenet because it has become cheaper, worked sufficiently in detail and is integrated into the existing wiring depending on the installation. But to use localtalk with external hours, it is necessary to use the hardware of apple localtalk: this is a mini-din-3. One conclusion rxd, the other is txd, and the other for the gpi pin on the poppy. Since the localtalk equipment was no less than twice as much as the cost of the phonenet hardware, and the word is that any external hardware hardware hardware device was incompatible in the manufacturer before the organization, and most places where they need speed, simply skipping localtalk , fully for ethernet, it means that i am going to get an external pose to be a real exercise. According to service service service 2.5, the gpi pin is not connected to the macintosh plus, lc or iisi. In addition to a concentrator, a relay, a router or the like, no special software installation is necessary. Connect the adapters to the corresponding ports, install the wiring and, if necessary, install the terminators.If the user does not have the slightest terminators, it is very simple to make them by means of an empty fork rj-11 (type 6p4c, what is 6 contacts, 4 connections), resistor 1/4w 120om and a special compressive tool for firing wires in the slot connector connects external contacts together (which are used by localtalk), and they are “unused” wires on standard setting up one line on a standard telephone line (two inner ones are in demand in a standard installation of a phone with a 1st line), which allows you to quickly adjust up localtalk and a mobile mobile installation a phone without a fairly high job. When wiring a network, note that localtalk is not a “ring” or “loop” topology, but a circuit with mushrooms with terminators to close the chain. The use of a ring topology without a concentrator is not worth it.
The preferred port for localtalk is a printer port, but the modem port is also able to be used if the ram has an active and installed opentransport. The computers involved should seem disconnected when the entire wiring and connectors are falsified. And a simple network of two machines, then connect the adapters to both ports of the printer. As soon as the computers involved are correctly connected, the next step is their configuration. The powerbook duet equipped with a sequential port has a tendency to use a modem, but one computer can use the modem and the other can use the printer, and they will all be tightly finished. Only the mac, which should be shared, should turn